Load data for .30 PICRA + .308 | 150gr | Sierra SPT Pro-Hunter

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sierra SPT Pro-Hunter
Manufacturer SKU:	2130
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.065" \| 27.1mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.184" \| 4.7mm
Shank Seated Depth:	0.184" \| 4.7mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5872_C311
Last updated:	2025-01-01

Load data for 50 loads in caliber .30 PICRA with .308 | 150gr | Sierra SPT Pro-Hunter bullet and 25 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35636	88%	**70	100%
ADI APS 450	<<locked>>	63%	36114	89%	**53	100%
Accurate 4100	<<locked>>	73%	36187	89%	**55	91%
[Accurate No. 11 FS]*	<<locked>>	81%	35056	86%	**58	83%
Accurate No. 9	<<locked>>	62%	35650	88%	**39	96%
Accurate TCM	<<locked>>	62%	35969	89%	**39	97%
Alliant 2400	<<locked>>	70%	35737	88%	**62	94%
Alliant BLUE DOT	<<locked>>	71%	34867	86%	**16	98%
[Hodgdon H110]*	<<locked>>	77%	35433	87%	**78	87%
Hodgdon LilGun	<<locked>>	78%	35389	87%	**04	94%
Hodgdon TrailBoss	<<locked>>	96%	25164	62%	**8	100%
Maxam CSB 1	<<locked>>	64%	35462	87%	**29	100%
Ramshot Enforcer	<<locked>>	70%	36114	89%	**75	95%
ReloadSwiss RS 14	<<locked>>	94%	23786	59%	**8	100%
ReloadSwiss RS 30	<<locked>>	94%	35839	88%	**04	90%
SNPE Vectan A0	<<locked>>	64%	36158	89%	**71	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	36419	90%	**75	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	34969	86%	**17	100%
[Somchem S265]*	<<locked>>	84%	34969	86%	**16	86%
Vihtavuori 3N38	<<locked>>	69%	36477	90%	**09	100%
Vihtavuori N105	<<locked>>	71%	35012	86%	**12	100%
Vihtavuori N110	<<locked>>	87%	36347	89%	**85	94%
Vihtavuori N32C Tin Star	<<locked>>	78%	34983	86%	**33	100%
Vihtavuori N350	<<locked>>	63%	35969	89%	**34	100%
[Winchester 296]*	<<locked>>	77%	36027	89%	**07	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	25976	64%	**29	100%
ADI APS 450	<<locked>>	60%	33634	83%	**20	100%
[Accurate 4100]*	<<locked>>	61%	23830	59%	**45	83%
[Accurate No. 11 FS]*	<<locked>>	78%	31517	78%	**96	81%
Accurate No. 9	<<locked>>	61%	33924	84%	**12	95%
Accurate TCM	<<locked>>	61%	33997	84%	**09	96%
[Alliant 2400]*	<<locked>>	61%	27311	67%	**20	89%
Alliant BLUE DOT	<<locked>>	61%	26252	65%	**75	95%
[Hodgdon H110]*	<<locked>>	67%	25309	62%	**94	80%
[Hodgdon LilGun]*	<<locked>>	61%	19363	48%	**99	81%
Hodgdon TrailBoss	<<locked>>	62%	13996	34%	**5	100%
Maxam CSB 1	<<locked>>	61%	33170	82%	**02	100%
[Ramshot Enforcer]*	<<locked>>	61%	26223	65%	**01	89%
ReloadSwiss RS 14	<<locked>>	61%	13271	33%	**1	100%
[ReloadSwiss RS 30]*	<<locked>>	78%	22742	56%	**65	80%
SNPE Vectan A0	<<locked>>	62%	33924	84%	**48	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	15505	38%	**8	81%
SNPE Vectan BA7 1/2	<<locked>>	62%	30850	76%	**65	100%
[Somchem S265]*	<<locked>>	75%	27369	67%	**91	81%
Vihtavuori 3N38	<<locked>>	61%	28616	70%	**04	99%
Vihtavuori N105	<<locked>>	61%	25237	62%	**58	100%
[Vihtavuori N110]*	<<locked>>	65%	18289	45%	**43	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24918	61%	**6	100%
Vihtavuori N350	<<locked>>	61%	33663	83%	**01	100%
[Winchester 296]*	<<locked>>	73%	30821	76%	**16	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.